The whole structure has experienced a deeper felt sense of space, organization, and integration by the Advanced Rolfing Fort Worth seventh hour session: Palintonicity/Adaptability (7–8–9) core expressing through lower pole (push). The amount of stress that the visceral cranium and neural cranium exhibit on the whole organism is immense and release in this session allows the work to transmission from the earth to the clouds. "If we establish a spanning polarity between the top of the head and the base of the sacrum in relation to the directional span of the gravity field, we have a new kind of structurally integrated man"-IPR. In the seventh hour we deal with the relationship of the head and neck to the rest of the body via the thoracic inlet/outlet and continue support in the upper ribs and thoracic inlet for a horizontal shoulder girdle. Continue core/sleeve/axial complex differentiation of the shoulders into head and neck relative to a functional axial component and address the hyoids, SCM and trapezius. Special attention should be given to posterior cervical and occipital fascia as well as side bends with rotations of the cranial bones. Address space or lack thereof with the visceral cranium for the first time by resolving rotations and compressions inter orally. This can be done now and possibly again later in another session which includes and is not limited to the exterior and inter oral fascia, temporalis, zygomatic arch, masseter, cheeks and mandibular line, tongue, hard and soft palate (especially with roto-scoliosis), lateral/medial pterygoid. The Advanced Rolfing Fort Worth inter nasal work will cultivate integration of the neuro-visceral cranium components. Depending on the lines of tension, back work should be seated from head to sacrum, integrating everything from the bottom off the feet to the frontalis, represented by SBL model or gallbladder channel. The best way to end this session is an ocular decoupling exercise that completely disengages and integrates the neck and head. Pelvic lift or tilt ends the Advanced Rolfing Fort Worth seventh hour. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series. John Barton | Certified Advanced Rolfer ® & Rolfing ® Fort Worth-Dallas | Certified Rolf Movement ® Practitioner

In the Advanced Rolfing Fort Worth hour six the work begins to make another shift in the Rolfing® protocol: Palintonicity Adaptability/Support (6–7–8) Core expressing through the lower pole. This session will complete the leg work of 2–4–6 of support, and complete pelvic work of 4–5–6 of transmission. When looking at the back of the body it is important to recognize the posterior reflections of the fifth hour anterior work. "Adaptive capacity at the hips precedes order in the spine. Organization in the core and sleeve precedes order in the spine. Order in Axial complex precedes order in the head." The main goals are to balance the pelvic girdle by organizing legs and intra pelvic structures, and free the sacrum and the spine from any remaining drifts and rotations in posterior soft tissue. Establish horizontals in the legs by working the lines of tension to resolve rotations and counter rotations in posterior leg segments. The primary tilters and shifters are different from left to right side so special attention should be given to working the asymmetry in a way that is congruent. This Rolfing Fort Worth session travels from the plantar fascia all the way up superficial back line over the calcaneus, gastroc, soleus, knee, hamstrings, rotators, sacro-tuberous and sacro-spinous ligaments. When observing the posterior axial fascia, side bends with rotations are to be worked in the direction of correction so that the organization in the whole structure from toe to head can emerge. Neck work should be with client supine for mobility and translation in flexion/extension Seated work is assisted movement through all three functional planes depending on the amount of integration that has occurred thus far so G or G' tendency should be obvious and observed. Pelvic lift or pull will end in hour six the work begins to make another shift in the Rolfing® protocol: Palintonicity Adaptability/Support (6–7–8) Core expressing through the lower pole. This Advanced Rolfing session will complete the leg work of 2–4–6 of support, and complete pelvic work of 4–5–6 of transmission. When looking at the back of the body it is important to recognize the posterior reflections of the fifth hour anterior work. "Adaptive capacity at the hips precedes order in the spine. Organization in the core and sleeve precedes order in the spine. Order in Axial complex precedes order in the head." The main goals are to balance the pelvic girdle by organizing legs and intra pelvic structures, and free the sacrum and the spine from any remaining drifts and rotations in posterior soft tissue. Establish horizontals in the legs by working the lines of tension to resolve rotations and counter rotations in posterior leg segments. This completes the Advanced Rolfing Fort Worth sixth hour. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series. John Barton | Certified Advanced Rolfer ® & Rolfing ® Fort Worth-Dallas | Certified Rolf Movement ® Practitioner

The second Advanced Rolfing Fort Worth Dallas session is a beautiful way to introduce work to the body. It cultivates a deeper awareness of what is really happening, it is a place of adaptability & inquiry. An awareness of more support is palpable going into the second session. The coded description of the work is — Second Hour: Support/Palintonicity (2–3–4) Bilateral Support. The feet and lower legs are critical; you must have support for the parts above. Even more critical is the ankle and the way those joints fit into each other. Assess your lower legs & the arches of your feet. The main goals of the Advanced Rolfing Fort Worth Dallas ten series is to create support for the pelvis with structures above it and lengthening the back. To create support, we look at the spring of the arches in the foot and how the weight is transmitted through the foot. Rotations in Talus & Calcaneus balance or inhibit the structure from aligning based on rotation/counter rotations and horizontal hinges at knees, ankles, and toes. Counter rotations between agreeable segments of the carpal or metacarpal bones deepens an imbalance in the body above. Work towards resolving asymmetries in low leg & knee. After working plantar fascia, and retinaculum, test how the fibula responds in dorsiflexion via interosseus membrane, working to resolve rotations & counter rotations between segments of the feet and low legs. Free up restricted drifts in the tissue so that the legs & feet can differentiate & integrate. Dr. Rolf called Rolfing Fort Worth the "Body geometry," or the natural organizing effect based upon the structures balance & alignment in the vertical gravitational field. The back needs lengthening and releasing of the erectors of the back, moving up & in at the wide portions & down & away where the tissue is narrow. Work with flat spots & side bends with their associated rotations to integrate the support and palintonicity above the supported pelvis. It is great for the client to connect through the feet while seated, exploring the relationship of the" eye of the foot." An exploration with down/up is always a profitable movement in the second session resourcing the "eye." Rolf Movement works well with integrating the second hour work. This exercise mimics the movement of the foot in gait. For the neck, work the cervical tissue in the direction of correction. Slow melting amounts of pressure can be given with the client seated and working with elbows into the clients' traps. With client supine, place fingers in sub-occipitals, lengthening into posterior portion. If there is time for some standing tracking before finishing is great. Pelvic lift or pull finishes the second session. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series. https://www.rolfmovement.com https://www.certifiedrolfing.com https://certifiedrolfing.com/john-barton-advanced-rolfing-fort-worth/ https://certifiedrolfing.com/research-rolfing-fort-worth-dallas/ https://certifiedrolfing.com/service/advanced-rolfing/ https://certifiedrolfing.com/service/rolfing-10-series/ https://certifiedrolfing.com/service/rolf-movement-treatments/ https://certifiedrolfing.com/rolfing-fort-worth-10-series-videos/ https://www.certifiedrolfing.com https://certifiedrolfing.com/rolfing-fort-worth-testimonials-and-more/ https://certifiedrolfing.com/rolfing-fort-worth-blog/ https://certifiedrolfing.com/rolfing-fort-worth-contact/ https://certifiedrolfing.com/rolfing-fort-worth-faqs-page-answers/ https://certifiedrolfing.com/rolfing-fort-worth-appointment-page/ https://www.rolfmovement.com https://www.rolfmovement.com https://www.rolfmovement.com https://www.youtube.com/channel/UCZCiH_lA5oWe5azlzUSZQXA www.youtube.com/@rolfmovement https://www.youtube.com/watch?v=vN7TkMUpqns https://reviews.birdeye.com/the-certified-rolfing-157252786544304 https://www.youtube.com/channel/UCZCiH_lA5oWe5azlzUSZQXA www.youtube.com/@rolfmovement https://www.youtube.com/watch?v=vN7TkMUpqns https://reviews.birdeye.com/the-certified-rolfing-157252786544304

The first Advanced Rolfing session is a beautiful way to introduce the work to the body. It cultivates a deeper awareness of what is really happening, it is a place of adaptability & inquiry. An awareness of more support is palpable going into the second session. The coded description of the work is — Second Hour: Support/Palintonicity (2–3–4) Bilateral Support. The feet and lower legs are critical; you must have support for the parts above. Even more critical is the ankle and the way those joints fit into each other. Assess lower legs & the arches of the feet. The main goals are to create support for the pelvis with structures above it and lengthening the back. To create support we look at the spring of the arches in the foot and how the weight is transmitted through the foot. Rotations in Talus & Calcaneous balance or inhibit the structure from aligning based on rotation/counter rotations and horizontal hinges at knees, ankles, and toes. Counter rotations between agreeable segments of the carpal or metacarpal bones deepens an imbalance in the body above. Work towards resolving asymmetries in low leg & knee. After working plantar fascia, and retinaculum, test how the fibula responds in dorsiflexion via interosseus membrane, working to resolve rotations & counter rotations between segments of the feet and low legs. Free up restricted drifts in the tissue so that the legs & feet can differentiate & integrate. Dr. Rolf called this the "Body geometry", or the natural organizing effect based upon the structures balance & alignment in the vertical gravitational field. The back needs lengthening and releasing of the erectors of the back, moving up & in at the wide portions & down & away where the tissue is narrow. Work with flat spots & side bends With their associated rotations to integrate the support and palintonicity above the supported pelvis. It's great for the client to connect through the feet while seated, exploring the relationship of the" eye of the foot". An exploration with down/up is always a profitable movement in the second session resourcing the "eye". Rolf yoga works well with integrating the second hour work. This exercise mimic's the movement of the foot in gait. For the neck, work the cervical tissue in the direction of correction. Slow melting amounts of pressure can be given with the client seated and work with elbows into the clients traps. With client supine, place fingers in sub-occipitals, lengthening into posterior portion. If there is time some standing tracking before finishing is great. Pelvic lift or pull finishes the second session. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series.

Advanced Rolfing Fort Worth Dallas & Rolf Movement Integration are necessary to include in each Rolfing ten series session and inclusion of subsequent pure movement integration sessions are an absolute gem when time allows for them to be rolled into the Rolfing Ten-Series of Structural Integration. The form or structure of the human body is a product of the nervous system and sub-consciousness mind. The fascia is the container of expression or the web of life; literally the human starts off as a streak of energetic potential and blooms into so much more. The respiratory diaphragm is primary from the digression of the heart and the rest of the web spins off from there. So, our movement is our expression of the way we breathe. The way we breathe is the way that we live. Breath and a deep-felt sense of its patterns are vital to our healthy perception of reality. The first of three movement sessions will include a functional breath release taken from Greenman's' Principles of Manual Medicine. Start with the client walking to assess through client's self-discovery where breath is bound and or flowing in the thorax and pelvis. It should be noted if the inspiration or expiration is more desirable. The client can lay supine on table and observe breath again in and out of the chest, belly, and pelvis. If restricted breath is in chest, release can be explored by placing direct either side, one hand on pectoralis the other under the same side scapula, with fingers pointed inferiorly. Advanced Rolfing Fort Worth differentiates the fascia layers. The breath should be expansive into A-P gamma resistance on inhale and contractive on maximum exhale. Gamma compression into ribs infero-posterior and scapula supero-anterior past previous resting point will create new expansive potential. Explore to a new resting point, exaggerating direction of breath and moving both hands anterior, same side with fingers pointing inferiorly. With the right hand on pectoralis and the left at the bottom of the ribs meet the client's exhalation with gamma resistance then on the exhalation compress and exaggerate past previous resting point to a new one. Repeat on the other side. This exercise is usually associated with a new expansive ability to experience breath, as well as exposing a subtle lift. Bring clients to stand and assess their gait cycle and how this breath release transmits through the body. A felt sense of lift and ease is usually associated with this technique enabling a more authentic expression. Advanced Rolfing Fort Worth Dallas recommends Advanced Rolf Movement as treatment to integrate the body. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series. John Barton | Certified Advanced Rolfer ® & Rolfing ® Fort Worth-Dallas | Certified Rolf Movement ® Practitioner https://www.rolfmovement.com https://www.certifiedrolfing.com https://www.rolfmovement.com https://www.certifiedrolfing.com https://certifiedrolfing.com/john-barton-advanced-rolfing-fort-worth/ https://certifiedrolfing.com/research-rolfing-fort-worth-dallas/ https://certifiedrolfing.com/service/advanced-rolfing/ https://certifiedrolfing.com/service/rolfing-10-series/ https://certifiedrolfing.com/service/rolf-movement-treatments/ https://certifiedrolfing.com/rolfing-fort-worth-10-series-videos/ https://www.certifiedrolfing.com https://certifiedrolfing.com/rolfing-fort-worth-testimonials-and-more/ https://certifiedrolfing.com/rolfing-fort-worth-blog/ https://certifiedrolfing.com/rolfing-fort-worth-contact/ https://certifiedrolfing.com/rolfing-fort-worth-faqs-page-answers/ https://certifiedrolfing.com/rolfing-fort-worth-appointment-page/ https://www.rolfmovement.com https://www.rolfmovement.com https://www.rolfmovement.com https://www.youtube.com/channel/UCZCiH_lA5oWe5azlzUSZQXA www.youtube.com/@rolfmovement https://www.youtube.com/watch?v=vN7TkMUpqns https://mail.google.com/mail/u/0/?ogbl#inbox?projector=1

Since my Advanced Rolfing® Fort Worth Dallas endeavor began, one thing has become clear, Rolfing® uncoupled from movement cues will not get the same results. What once seemed abstract, except for the occasional "aha," now seems much more tangible. Which begs the question "What is Rolfing" is also begging the hallows of movement protocols as well. Here is how I have incorporated movement into table collaborate with a client through session 5: First hour working with 3d breath exploration on table and standing in gravity. Second hour: Rolf Yoga on table and seated on floor, coupled with standing traction. Third hour: Arm drops and ocular uncoupling of limbs of expression. Fourth hour: Connecting eye of foot with pelvic floor and ocular uncoupling with limbs of support. Fifth hour: Walking bell clapper: moving from LDH and exploration in sensation of letting anal triangle "go." My training in the art formally known as power yoga affords me the opportunity to work with movement in a unique way. There are dynamic postures that I feel could evoke contra-lateral movement if done with movement queuing and without. For example, fighting monkey, playing monkey, Komodo dragon, water wheel and others. Walking with Rolf Movement awareness of the spine and its two girdles ability to counter rotate each other in gait cycle, the loading, unloading, reloading sensation emerges. I also like the imagery that rubber bands are connecting the two girdles, upper to opposing lower on both sides, so that when walking there is a sensation of one band shortening bringing shoulder and hip closer while the other is lengthening. With the client supine I start with 3d breathing. Then I place his feet into my thighs as I stand at the end of table, as connected to the earth in standing. Guiding the client to allow one shin to float towards sky while allowing the other Gastroc to be heavy towards the table. Essentially flexing one knee and extending the other slightly, guiding him as if he were walking. Imagine walking through ankle high water then up to knees and pelvis, cultivating a relationship to LDH (both sides) 30 min. Advanced Rolfing & Rolf yoga 5 min. Walking exploration of relationship of heaven to earth with him being the cream filling (weight/volume) 5 min. Vestibular-oculo-cervical reflex 20 min. He had impressive results and a fun experience, also relief from back and shoulder pain. Buoyancy! He could not believe that he felt "as if" he had received the same results from manipulative sessions. Impression-weight, plantar surface stimulation, shape, volume, inside/outside Expression-3d breathing with impression, fixed diaphragm inhibits expression. Coordination-inhibiting inhibition, cueing with one posterior leg heavy the other anterior leg floating, and imagery of walking through different degrees of water depths. Chiropractic, Physical Therapy, or Massage Therapy are not substitutes for an Advanced Rolfing Fort Worth Ten Series. John Barton | Certified Advanced Rolfer ® & Rolfing ® Fort Worth-Dallas | Certified Rolf Movement ® Practitioner https://www.rolfmovement.com https://www.certifiedrolfing.com

http://www.sd-cglasers.com/ Gantry Type Large Format Sheet Metal Laser Cutting Machine manufacturer JINAN CGJG LASER EQUIPMENT CO., LTD (CGJG Laser) was founded in 2017, The company focuses on the R&D, manufacturing and sales of high-power laser processing equipment, including high-power laser cutting machine, laser welding machine and multi-functional laser processing equipment, to provide customers with personalized and professional laser processing system solutions. The main products of super laser cover the full power series of optical fiber laser cutting series, laser marking series, laser processing special equipment and cutting complete equipment, etc. the products are widely used in iron and steel metallurgy, non-ferrous metals, automobile and parts, aerospace, military electronics, precision instruments and meters, machinery manufacturing, hardware tools, integrated circuits, solar energy and other industries. The production base in Jinan covers an area of 40,000 square meters, with dozens of high-precision imported CNC machining centers and large-scale gantry milling machines. The total value of production equipment exceeds 5 million US dollars. It realizes independent research and development design and high-precision manufacturing of the core components of the cutting machine. The company has more than 300 talents of various types and has an annual production capacity of 1,000 fiber laser cutting machines, of which more than 1,000 laser pipe cutting machines have been sold in total, and the products are sold in more than 60 countries and regions around the world.We have obtained more than 20 product and technology patents, and more than 30 new patent applications in 2021. The company has passed ISO9001 quality system certification, and its products have obtained EU CE and US FDA certifications. We have a number of scientific research results. The professional core R&D team of CGJG Laser accounts for more than 20% of the company's total employees, including professional teams such as mechanical engineers, software engineers, electrical engineers, and industrial designers. The company has a comprehensive grasp of core technologies such as precision manufacturing of chucks, software cutting technology, and numerical control systems to ensure the stability and production efficiency of the equipment. CGJG Laser high efficiency customer service team, accounts for 20% of the company鈥檚 total employees, including pre-sales service, in-sale service, after-sales service, customer training, etc., from technical process consultation, incoming proofing reception, installation and commissioning, and free customers In terms of personnel induction training, equipment maintenance and repair, etc., we provide 24-hour all-round quick response services. Gantry Type Large Format Sheet Metal Laser Cutting Machine manufacturer website:http://www.sd-cglasers.com/

http://www.hbbestbuyhardware.com/ Hex Thick Nuts Located in handan city, near Beijing, Tianjin, Hebei Bestbuy hardware co., ltd enjoy convenient water, land and air transportation. It is a professional large-scale manufacturer of all types of fasteners, Electric power fittings and Aluminum formwork accessories, a production, processing distribution and wholesale entitles. Our parent company is hebei shenghui Hot dip galvanized Industrial Group. Our main products include fasteners, Electric power fittings,Aluminum formwork accessories and other related metal products. Our products with high quality, competitive prices are widely recognized and trusted by users and can meet continuously developing economic and social needs. We are looking forward to the Win-win cooperation and mutual development with you.Hex Thick Nuts website:http://www.hbbestbuyhardware.com/

http://www.granulatorrecycle.com/metal-crushing-machine/ China Metal Crushing Machine manufacturers Features: Industrial double shaft metal crusher machines are large shredders widely used for recycling. According to different processing materials, the number of blades, blade thickness and number of shafts of the metal crusher can be customized as required. There are different models with different motor powers to support different crushing capacities. Customers can provide details of processing materials for the best recommendation. Application: 1. Scrap metal: waste electric cables, metal profiles, metal alloy,car shell, engine shell,etc. 2. Home appliance: TV, telephone, refrigerator,air conditioner.etc. 3. Wood products: wood plate, wood frame, pallets,etc. 4. Rubber products: car tyre, truck tyre.etc. 5. Plastic products: PE,PVC pipes.etc. 6. Other garbage and fabric waste. Specification: NameIndustrial Double Shaft Metal Crusher Machine ModelDS-400DS-600DS-800 Processing capacity300-400KG/H600-800KG/H800-1000KG/H Power18.5KW/22KW15KW*222KW*2 VoltageAs required Dimension1200*600*1400mm1450*870*1800mm280081200*2200mm Weight800kg2800kg3500kg Detail Instruction: 1. Moving blades and sleeve of the crusher shaft are easy to disassemble.The whole scrap metal crusher is easy to maintain. 2. Quantity and tooth angle of the moving blades could be customized according to clients' demand. 3. Main shaft of the industrial double shaft metal crusher machine is driven by gear reducer,the whole crusher machine works with stable situation and low noise. 4. The metal crusher machine is with automatic PLC control system. 5. The copper wire shredder machine is made of precision welding,which is durable.China Metal Crushing Machine manufacturers website:http://www.granulatorrecycle.com/metal-crushing-machine/

http://www.xiannengic.com/ Integrated Circuits IC Company Profile Xianneng Technology (Hong Kong) International Co., Ltd. We are a integrating industry and trade technology company. specializes in providing one-stop electronic components with a single service. In 2006, we also became a TBF of Canada, a senior member of Hong Kong Electronic Stock Network, STOCK With more than 10 years of spot certified members and Sponsors of TBF, we have gained extensive support and credibility. So far, we have become a well-known IC supplier at home and abroad. The IC electronic components we stock and sell are from well-known manufacturers of the world, ALTERA-INTEL.XILINX-AMD.TI ADI, FREESCALE, RENESAS,NXP^ and Self-developed branded products and are widely used in various fields such as industry, network, communication, instrumentation, computer, automobile, military and so on. In2010, we established the research & development department and the brand XNWY Tech. We applied and passes for trademark patent in the us patent no. 5329611 & China patent no. 20969667, focusing on r&d with production .MOS:High pressure and low pressureMOSFET,Bipolar transistor (BJT): (Electronic Lighting)Switching Power)TISP) ,Insulated gate bipolar transistor (IGBT),Diode :Fast recovery diode (FRD)Schottky diode (SBD)Constant current diode (CRD) And support OEM customization and special function customization technical.We adhere to the guidelines and trust of time management. Management philosophy focuses on the best quality, service and mutual benefit. We have won the support and trust of all our customers. We sincerely look forward to cooperating with domestic and foreign distributors, retailers, distributors and manufacturers to create a better future! Operate products IC Semiconductor chip The transistor Modules Capacitance resistance Diodes Triodes Tantalum capacitors Inductors Communication chip Memory chip Military industry Medical application Civil use Car use Company Advantages Professional IC supplier, 15 years of experience in electronic component sales, more then 500,000 IC, diode, module, capacitor, resistor connector and other components to choose from, competitive price, fast delivery, Low MOQ, Excellent service. Please contact us Address:(1) 7/F VICTORY鈥橲 BUILDING,LIANYUN INDUSTRIALZONE,GUANGDONG,CHINA (1)Andy Email: info@xiannenghk.com (2)Jane Email: Sales18@xiannenghk.com Tel: 86-768-2255769 Address:(2) Room 1117,Nanguan Jiejia Building,Shennan Middle Road,Futian Distrcit,Shenzhen (1)Amily Tel: 86 755 83041487 Email: sales@xiannenghk.com Integrated Circuits IC website:http://www.xiannengic.com/